Elita 160mm 90-Degree Mitre Clamps (Sold as a Pair) Precision Alignment for the Perfect Right-Angle Bond Take the stress out of pre-bonding with the Elita 160mm Mitre Clamps. Professional tilers know that as resin cures, the natural contraction can cause mitred edges to pull inwards, ruining your alignment and leaving you with an angle less than 90 degrees. These specialized clamps are the solution, holding your tiles in a rock-solid, perfect 90-degree position throughout the entire curing process. Designed specifically for the modern "trim-less" tiling trend, these clamps ensure your corners are crisp, square, and structurally sound every time. Why Choose Elita Mitre Clamps? Counteract Resin Pull: Prevents the resin from warping the joint as it sets, guaranteeing a flawless 90-degree finish. Streamlined Design: No need for cumbersome G-clamps or awkward makeshift rigs. Our dedicated design is built for the tiling environment. Easy Screw-Down Locking: Features intuitive screw-down blocks that securely lock the tiles into place with minimal effort. Professional Capacity: The 160mm size provides ample stability for a wide range of tile dimensions and thicknesses. Sold as a Pair: Everything you need to secure your corners immediately. How to Use for a Professional Finish: Apply your Elita EPO-FUSION resin to your mitred edges. Bring the tiles together and slide the Elita Mitre Clamps onto the joint. Tighten the screw-down blocks to lock the tiles at a precise 90-degree angle. Leave the clamps in place until the resin has fully cured to ensure the joint remains perfectly square. The Ultimate Mitre-Bonding Setup For the most accurate results, use these clamps in conjunction with: Elita EPO-FUSION Resin: For high-strength, weather-resistant bonding. Elita Mixing Board & Sticks: To ensure a clean, perfectly blended colour match. Elita Applicator Cards: To fill the joint seamlessly before clamping.