Professional Two-Part Bonding Adhesive High-Strength, High-Flexibility Engineering for Tile Fabrication When structural integrity is the top priority, Elita Structural Epoxy is the industry’s choice for precision fabrication. This two-part system (Part A and Part B) is engineered exclusively for heavy-duty bonding. Designed to handle movement, vibration, and high-stress loads, it provides a flexible yet permanent bond for demanding architectural tasks. Important Note: This product is formulated strictly for structural bonding only. It is not intended for decorative finishes, aesthetic joint filling, or visible surface repairs. Key Performance Features: Exceptional Flexibility: Unlike standard resins, this epoxy creates a resilient bond that can withstand subtle movements and vibrations without cracking—perfect for precision tile mitres. Maximum Bond Strength: Provides superior adhesion for tile fabrication, metal joints, and complex structural tasks. Extended Working Time: Enjoy a generous 1-hour working window after mixing, allowing for careful adjustments and large-scale fabrication without the rush. Non-Sag Formula: Ideal for vertical applications and intricate mitre joints, staying exactly where you apply it. Professional Volume: Supplied as a 2kg total kit (1kg Part A and 1kg Part B). Technical Specifications: Mixing Ratio: Precise 50:50 ratio (by volume or weight). Working Time: Approximately 60 minutes at room temperature. Full Cure: Reaches maximum structural strength in 24–48 hours. Application: Ideal for mitre fabrication, stone-to-stone bonding Mixing & Application Instructions: Preparation: Ensure all surfaces are clean, dry, and free from dust or grease. Ratio: Combine Part A and Part B in a strict 50:50 ratio. Accuracy is essential for proper curing and performance. Blend: Mix thoroughly until the colour and consistency are completely uniform. Apply: Utilize the 60-minute working time to bond your materials. Use Elita Mitre Clamps to hold the fabrication in place during the cure. Cure: Allow 24–48 hours for the bond to reach its full load-bearing potential. The Professional’s Workflow For a perfect architectural finish, use Elita Structural Epoxy for the internal bond to ensure strength, and finish the visible joint with Elita EPO-FUSION or Easy Sand for a seamless colour match.